Sequel 1580-UV 598F ANTHRACITE thermoplastic polyolefin material exhibits significantly greater mar resistance than conventional TPOs. Sequel 1580-UV 598F ANTHRACITE polyolefin is typically used for automotive applications that demand low warpage and low CLTE, as well as excellent scratch and mar resistance.
Sequel 1580-UV 598F ANTHRACITE
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 16.3 g/10 min |
| Density (23 °C) | 0.98 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 1650 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 21.5 MPa |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications